保定馳情模具銷售有限公司
主營產品: 塑料模
水泥公路混泥土防撞墻模具定做-馳情模具
價格
訂貨量(件)
¥32.00
≥1
店鋪主推品 熱銷潛力款
祺祸祵祷祷祶祸祳祹祹祹
保定馳情模具銷售有限公司
店齡6年 企業認證
聯系人
崔經理
聯系電話
祺祸祵祷祷祶祸祳祹祹祹
經營模式
生產加工
所在地區
河北省保定市
主營產品
Before formwork erection, it is necessary to measure to correct the foundation elevation of anti-collision wall. Too high or too low foundation will have a very serious impact on the later ctruction. If it is too high, the higher part must be chiseled out when installing the formwork, which is time-cuming, laborious and expensive. If it is too low, there may be gaps at the bottom of the formwork in the later stage, which will cause cement slurry to flow out and cause pockmarked surface.
支模時需要測量來確定防撞墻的平面位置和鋼模的標高,這決定了防撞墻的線型和美觀問題,測量不準確,容易造成防撞墻歪歪扭扭、高低不平,嚴重的甚至?xí)乱欢畏雷矇π纬慑e(cuò)臺,一旦產生錯臺,后期的處理將會耗費更多的時間、精力、金錢。測量準確了,防撞墻成型以后,線型流暢,看起來就會很舒服、很漂亮。
1.箱梁鋼筋安裝時,根據防撞墻位置準確放線,拉雙線(底部和頂部)預埋防撞墻鋼筋;箱梁施工完成后檢查、調整預埋鋼筋位置,拉線綁扎剩余鋼筋,保護層墊塊應綁扎牢固,扎絲頭不得侵入保護層;穿入預埋管道(伸縮縫、斷縫處斷開鋼筋,按設計要求設置鋼套管)。
1. When the reinforcement of box girder is installed, according to the ition of the anti-collision wall, the double-line (bottom and top) is drawn to precisely embedding the anti-collision wall reinforcement; after the ctruction of box girder, the ition of the embedded reinforcement bar is checked and adjusted, the remaining reinforcement bar is tied by the wire, the cushion block of the protective layer should be firmly tied, and the wire-binding head should not penetrate the protective layer; and the embedded pipeline (expansion and contractio) should be penetrated. The steel bars are broken at the joints and the broken joints, and the steel sleeves are set up according to the design requirements.
防撞墻是為了防止車輛沖到道路以外的或者橋梁以外而設置的,一般在高速公路橋梁中多見。為了減少車輛對周邊周邊區域造成的危險性,防止車輛沖出橋梁也設置混凝土防撞墻。
Anti-collision walls are set up to prevent vehicles from rushing out of roads or bridges. They are usually found in highway bridges. In order to reduce the danger caused by vehicles to the surrounding areas, concrete anti-collision walls are also set up to prevent vehicles from rushing out of bridges.
近年來,隨著國家經濟高速發展,全國基礎設施是建設漸入高潮,各地基礎設施建設如火如荼地開展起來,作為改善城市交通的重要手段之一,立交橋也在全國如雨后春筍般一座座矗立起來。防撞墻作為立交橋面系的重要組成部分,它不僅擔負著安全責任,還直接影響著橋梁的美觀,所以,如何對防撞墻施工質量進行良好的控制也成了一個不可忽視的問題。