定制卡盤模具 混凝土卡盤模具 樂豐制造在生產制作的時候，因其體積小，所以在生產制作的時候，是比較簡單的，而且這種模具的外觀是比較規整的，一般在生產的過程中，使用鋼材進行規定的切割和焊接操作就可以了。在切割的時候我們要按照圖紙的要求進行，因為切割的時候主要決定了各個部位的尺寸，一般圖紙上都會標上模具各個部位的尺寸，所以我們要按照要求進行操作，為了進行切割的準確性，我們不僅要進行測量，在操作的時候一定要使用先進的生產技術，這樣才能保證生產的過程中不會出現什么意外，生產制作出來的拉線盤模具質量才有保證。這種模具為了可以能夠非常便利的安裝，一般安裝的外緣和面板是形成一個整體的，就是在面板的一段進行塑形成90°，形成的外緣一般都是要進行螺絲連接的，所以我們在生產制作的時候，要進行打孔，卡盤模具打孔的大小和螺絲要進行配套使用，這樣才能保證在安裝拉線盤模具的時候，保證其緊密性。

During the production and manufacture of customized chuck mould, the concrete chuck mould made by Lefeng is relatively simple because of its small volume, and the appearance of this kind of mould is relatively regular. Generally, in the process of production, the specified cutting and welding operation of steel can be used. When cutting, we should follow the requirements of the drawing, because the size of each part is mainly determined when cutting. Generally, the size of each part of the mold will be marked on the drawing, so we should operate according to the requirements. In order to cut accurately, we not only need to measure, but also use advanced production technology when operating, so that we can To ensure that there will be no accidents in the process of production, the quality of the cable tray mould produced by production can be guaranteed. In order to facilitate the installation of this kind of mold, the outer edge and the panel are generally installed as a whole, that is, 90 ° is formed in a section of the panel, and the formed outer edge is generally connected by screws. Therefore, we need to drill holes in the production and production, and the size of the holes in the chuck mold and the screws should be used together, so as to ensure that the When installing the stay plate mould, ensure its tightness.