下面來說一下有骨安裝的拆卸步驟：1，手握住雨刮擺，向上拉起雨刮搖臂（注意，如果有些車型雨刮在引擎蓋下面隱藏?zé)o法直接抬起，請使用維修模式） 0.2，在雨刮下落對應的當風玻璃墊上毛巾一塊，是為了就避免搖臂不小心跌落打爛玻璃0.3，旋轉雨刮和搖臂夾角成90度（部分可以旋轉至45度） 0.4，觀察尋找雨刮和搖臂夾角位置的小暗扣（個別型號沒有該暗扣，請直接忽略這一步）0.5，按下小暗扣不松手，另外一只手把整個雨刮整體向下拉，向搖臂根部方向下拉（個別型號沒有該暗扣，請直接晃動下拉雨刮）。雨刷下移過程掛鉤露出后，從一側取下雨刷即可完成拆卸.XX

如何正確使用雨刮器？ （1）擦拭器必須有水擦拭器。 “刀刃”非常脆弱。如果玻璃上有東西被污染，很容易損壞擦拭器，水可以清潔和潤滑，可以保護擦拭器和玻璃。同時，它可以使玻璃更清潔。 （2）及時清理附件。如果發現粘合帶被弄臟，應及時清潔。用濕布擦拭擦拭器“刀口”并保持“刀刃”清潔。如果在玻璃上發現鳥糞等污垢，應立即清洗。雖然玻璃不會被腐蝕，但刮水片會被這些污垢損壞。 （3）當車輛長時間不使用時，請安裝雨刮器并安裝雨刮器，以防止灰塵粘附在條帶和玻璃之間。再次使用時，不會將灰塵等與玻璃水混合，也不會損壞玻璃和條帶。

In contact with the glass type, the wiper should be cleaned except for its structure. The important part is the strip. Since the wiper wipes the glass rainwater by the wiper strip, the strip design is very important. The wiper strip material is divided into two categories: natural rubber and synthetic rubber, among which synthetic rubber has a long service life. Generally, the high-grade wiper will be made of double-layer rubber. The soft rubber will be used at the joint between the strip and the steel to ensure good smoothness when wiping, and the glass is bonded to the glass. A slightly hard material allows the strip to have a certain amount of force to scrape the rain. In addition, the grade of the strip will also affect the quietness and service life of the wiper. Some products will add an additional graphite component to make the wiper quieter and smoother.xx