濟南微爾激光設備有限公司 WED-1625震動刀切割機

   本機床采用了機床級穩重扎實的工作底盤，確保快速運動時的穩定性，運動系統采用直線導軌導向和精密齒輪、齒條傳動，確保加工精度，采用經特殊處理的全敞開式工作平臺，操作方便。

性能特點

1、采用64位高速DSP組建SmartCarver控制器，性能大幅度提高,平穩的S型加減速控制軟件設計，動作迅捷平穩

2、機械部件配裝原裝進口齒輪、齒條運動傳動系統，保證了高速運動下的高精度效果。機床級滾動式加工平臺穩定可靠，配合自動上、下料系統，適合大批量、多批次作業要求。

Advantages of Jinan Weier Vibrating Knife Products

The working principle and advantages of CCD camera:

The scene is projected onto the surface of the image sensor through the optical image generated by the lens (LENS). Then it is converted into electrical signal. After A/D (analog-to-digital conversion) conversion, it is converted into digital image signal. Then it is processed in the digital signal processing chip (DSP). Then it is transmitted to the computer through the USB interface for processing. The picture can be seen through the display. Like it. Its advantages are: 1. high resolution; 2. low noise and high sensitivity; 3. wide dynamic range; 4. good linear characteristic curve; 5. large area sensitivity; 6. low image distortion; 7. low power, not affected by strong electromagnetic field; 8. small size, light weight; 9. good charge transmission efficiency; 10. stable quality, firm, not easy to grow old It is easy to use and maintain.

濟南微爾振動刀切割優勢：1.

切割一套汽車大包圍腳墊，只需3-4分鐘

2：無需刀模、模切機，可節省大量的人力、刀模及模切機成本。

3：汽車內飾切割機，完全代替汽車座椅/座墊/腳墊/方向盤皮套、布套、海綿套的手工設計、打樣和切割工序，助您節省大量人力、刀模及材料損耗成本。

4：可切割皮、海綿+覆布+皮革復合皮料、PVC腳墊、絲圈腳墊、紙張、紙板、PVC塑膠板、密封墊圈等柔性材料。

5.可切割KT板，皮革，布料，纖維，軟金屬，軟塑料，環保新材料等，微爾震動刀切割設備，正越來越適用于新型行業，為智能化設備做出自己的貢獻

Jinan Weier vibration cutter cutting advantages: 

1.Cut a set of automobile big surround footpads, only 3-4 minutes.

2: There is no need for die and die-cutting machine, which can save a lot of manpower, cost of die and die-cutting machine.

3: The automobile interior trim cutting machine completely replaces the manual design, proofing and cutting processes of automobile seat/seat cushion/foot cushion/steering wheel cover, cloth cover and sponge cover, which helps you save a lot of manpower, cutting die and material loss costs.

振動刀裁剪振動刀

濟南微爾振動刀講解：數控設備就是指應用這種技術的設備。數控技術也叫計算機數控技術，目前它是采用計算機實現數字程序控制的技術。這種技術用計算機按事先存貯的控制程序來執行對設備的運動軌跡和外設的操作時序邏輯控制功能。由于采用計算機替代原先用硬件邏輯電路組成的數控裝置，使輸入操作指令的存貯、處理、運算、邏輯判斷等各種控制機能的實現，均可通過計算機軟件來完成，處理生成的微觀指令傳送給伺服驅動裝置驅動電機或液壓執行元件帶動設備運行。